Endless Flat Web Sling Type 5 (EN) - Endless sling, sometimes referred to as a grommet. It is a continuous loop formed by joining the ends of the webbing together. Endless slings are versatile and the most economically priced. They can be used in all three types of hitches. The sling can be rotated to minimize wear. The sling legs can be spread for improved load balance.

Endless Flat Web Sling One Ply - Type V

Type 5 Endless

Vertical (lbs.)

Choker (lbs.)

Basket (lbs.)

EN1-901PF

3,200

2,500

6,400

EN1-902PF

6,400

5,000

12,800

EN1-903PF

8,600

6,900

17,200

EN1-904PF

11,500

9,200

23,000

EN1-906PF

16,300

13,000

32,600

EN1-908PF

19,200

15,400

38,400

EN1-910PF

22,400

17,900

44,800

EN1-912PF

26,900

21,500

53,800

 

Endless Flat Web Sling Two Ply - Type V

Type 5 Endless

Vertical (lbs.)

Choker (lbs.)

Basket (lbs.)

EN2-901PF

6,200

4,900

12,400

EN2-902PF

12,200

9,800

24,400

EN2-903PF

16,300

13,000

32,600

EN2-904PF

20,700

16,500

41,400

EN2-906PF

28,600

23,000

57,200

EN2-908PF

30,700

24,500

61,400

EN2-910PF

33,600

26,800

67,200

EN2-912PF

37,600

30,000

75,200

 

Endless Flat Web Sling Three Ply - Type V

Type 5 Endless

Vertical (lbs.)

Choker (lbs.)

Basket (lbs.)

EN3-901PF

8,000

6,400

16,000

EN3-902PF

16,000

12,800

32,000

EN3-903PF

21,500

17,200

43,000

EN3-904PF

28,700

23,000

57,400

EN3-906PF

40,700

32,500

81,400

EN3-908PF

46,000

36,800

92,000

EN3-910PF

51,500

41,200

103,000

EN3-912PF

59,200

47,300

118,400

 

Endless Flat Web Sling Four Ply - Type V

Type 5 Endless

Vertical (lbs.)

Choker (lbs.)

Basket (lbs.)

EN4-901PF

10,000

8,000

20,000

EN4-902PF

19,800

15,800

39,600

EN4-903PF

26,700

21,300

53,400

EN4-904PF

35,600

28,400

71,200

EN4-906PF

50,500

40,400

101,000

EN4-908PF

57,600

46,000

115,200

EN4-910PF

67,200

53,700

134,400

EN4-912PF

80,700

64,500

161,400

Combining strength and versatility, endless slings are the most cost-effective general-purpose web slings available.

  • Minimum 5:1 design factor.
  • Fittings available in forged aluminum or alloy steel.
  • Do not exceed rated capacities. The ratings must be reduced when lifting at angles of less than 90 degrees with the horizontal.